Structural characteristics of temperature and humidity control test chamber

2024-10-18

Structural characteristics of temperature and humidity control test chamber

Suitable for various small electrical appliances, instruments, materials, and components for wet heat testing, it is also suitable for conducting aging tests. This test chamber adopts the most reasonable structure and stable and reliable control method currently available, making it aesthetically pleasing, easy to operate, safe, and with high precision in temperature and humidity control. It is an ideal equipment for conducting constant temperature and humidity tests.

(1) The test box body is in the form of an integral structure, with the refrigeration system located at the lower rear of the box and the control system located at the upper part of the test box.

(2) Inside the air duct interlayer at one end of the studio, there are devices such as heaters, refrigeration evaporators, and fan blades distributed; On the left side of the test box, there is a Ø 50 cable hole, and the test box is a single door (stainless steel embedded door handle)

(3) The double-layer high temperature and anti-aging silicone rubber seal can effectively ensure the temperature loss of the test chamber

(4) There are observation windows, frost prevention devices, and switchable lighting fixtures on the box door. The observation window adopts multi-layer hollow tempered glass, and the inner adhesive sheet conductive film is heated and defrosted. The lighting fixtures adopt imported brand Philips lamps, which can effectively observe the experimental changes in the studio from all angles.

The refrigeration cycle of the temperature and humidity control box adopts the reverse Carnot cycle, which consists of two isothermal processes and two adiabatic processes. The process is as follows: the refrigerant is adiabatically compressed to a higher pressure by the compressor, and the work consumed increases the exhaust temperature. Then, the refrigerant exchanges heat with the surrounding medium through the condenser and transfers heat to the surrounding medium. After the refrigerant undergoes adiabatic expansion through the shut-off valve, the temperature of the refrigerant decreases. Finally, the refrigerant absorbs heat from the object at a higher temperature through the evaporator, causing the temperature of the cooled object to decrease. This cycle repeats itself to achieve the goal of cooling down.

The refrigeration system design of this test chamber applies energy regulation technology, which can ensure the normal operation of the refrigeration unit and effectively adjust the energy consumption and refrigeration capacity of the refrigeration system, so as to maintain the refrigeration system in the optimal operating state. By using Balanced Temperature Control (BTC), the control system automatically calculates the output of the heater based on the set temperature point through PID calculation when the refrigeration system is working continuously, ultimately achieving a dynamic balance.

Dear customer:

Hello, our company is a high-quality development team with strong technical strength, providing high-quality products, complete solutions, and excellent technical services to our customers. The main products include walk-in constant temperature and humidity testing chambers, UV accelerated aging testing machines, rapid temperature change testing chambers, walk-in environmental testing chambers, UV aging testers, constant temperature and humidity chambers, etc. Our company adheres to the principle of building a business with integrity, maintaining quality, and striving for progress. With a more determined pace, we continuously climb new heights and contribute to the national automation industry. We welcome new and old customers to confidently choose the products they like. We will serve you wholeheartedly!

#Temperature Cycling Test Chamber #Hot And Cold Temperature #Programmable Constant Temperature And Humidity Test Chambers #High temperature aging chamber #Reliable Temperature And Humidity Test Machine #Constant Temperature Test Chambe

Tablet Reliability Test

2024-10-18

Tablet Reliability Test

A Tablet Computer, also known as a Tablet Personal Computer (Tablet PC), is a small, portable personal computer that uses a touch screen as its basic input device. It is an electronic product with strong mobility, and it can be seen everywhere in life (such as waiting stations, trains, high-speed trains, cafes, restaurants, meeting rooms, suburbs, etc.). People carry only simple coat protection or even no, in order to facilitate use, the design reduces the size, so that it can be directly placed in the pocket or handbag, backpack, but the tablet computer in the process of moving will also experience many environmental physical changes (such as temperature, humidity, vibration, impact, extrusion, etc.). Etc.) and natural damage (such as ultraviolet light, sunlight, dust, salt spray, water droplets... It will also cause artificial unintentional injury or abnormal operation and misoperation, and even cause failure and damage (such as: household chemicals, hand sweating, falling, terminal insertion and removal too much, pocket friction, crystal nails... These will shorten the life of the tablet computer, in order to ensure the reliability of the product and extend the service life to improve, we must carry out a number of environmental reliability test projects on the tablet computer, the following relevant tests for your reference.

Environmental test project description:

Simulate various harsh environments and reliability assessments used by tablet computers to test whether their performance meets the requirements; It mainly includes high and low temperature operation and high and low temperature storage, temperature and condensation, temperature cycle and shock, wet and heat combination test, ultraviolet, sunlight, drip, dust, salt spray and other tests.

Operating temperature range: 0℃ ~ 35℃/5% ~ 95%RH

Storage temperature range: -10℃ ~ 50℃/10% ~ 90%RH

Operating low temperature test: -10℃/2h/ power operation

Operating high temperature test: 40℃/8h/ all running

Storage low temperature test: -20℃/96h/ shutdown

Storage high temperature test: 60℃/96h/ shutdown

High temperature test of vehicle storage: 85℃/96h/ shutdown

Temperature shock: -40℃(30min)←→80℃(30min)/10cycle

Thermal Shock Test Chamber

Wet heat test: 40℃/95%R.H./48h/ power standby

Hot and humid cycle test: 40℃/95%R.H./1h→ramp:1℃/min→-10℃/1h, 20cycles, power standby

Temperature Cycling Test Chamber

Wet heat test: 40℃/95%R.H./48h/ power standby

Hot and humid cycle test: 40℃/95%R.H./1h→ramp:1℃/min→-10℃/1h, 20cycles, power standby

UV Aging Chamber

Weather resistance test:

Simulation of the most severe natural conditions, solar thermal effect test, each cycle of 24 hours, 8 hours of continuous exposure, 16 hours to keep dark, each cycle radiation amount of 8.96 kWh/m2, a total of 10cycles.

Salt spray test:

5% sodium chloride solution/Water temperature 35°C/PH 6.5~7.2/24h/ Shutdown → Pure water wipe shell →55°C/0.5h→ Function test: after 2 hours, after 40/80%R.H./168h.

Dripping test: According to IEC60529, in line with IPX2 waterproof rating, can prevent water droplets falling at an Angle of less than 15 degrees from entering the tablet computer and causing damage. Test conditions: water flow rate 3mm/min, 2.5min at each position, checkpoint: after test, 24 hours later, standby for 1 week.

Salt Spray Test Chamber

Dust Test:

According to IEC60529, in line with the IP5X dust class, can not completely prevent the entry of dust but does not affect the device should be the action and anquan, in addition to tablet computers are currently many personal mobile portable 3C products commonly used dust standards, such as: mobile phones, digital cameras, MP3, MP4... Let's wait.

Conditions:

Dust sample 110mm/3 ~ 8h/ test for dynamic operation

After the test, a microscope is used to detect whether dust particles will enter the interior space of the tablet.

Chemical staining test:

Confirm the external components related to the tablet, confirm the chemical resistance of household chemicals, chemicals: sunscreen, lipstick, hand cream, mosquito repellent, cooking oil (salad oil, sunflower oil, olive oil... Etc.), the test time is 24 hours, check the color, gloss, surface smoothness... Etc., and confirm whether there are bubbles or cracks.

Mechanical test:

Test the strength of the mechanical structure of the tablet computer and the wear resistance of the key components; Mainly includes vibration test, drop test, impact test, plug test, and wear test... Etc.

Fall test: The height of 130cm, free fall on the smooth soil surface, each side fell 7 times, 2 sides a total of 14 times, tablet computer in standby state, each fall, the function of the test product is checked.

Repeated drop test: the height of 30cm, free drop on the smooth dense surface of 2cm thickness, each side fell 100 times, each interval of 2s, 7 sides a total of 700 times, every 20 times, check the function of the experimental product, tablet computer is in the state of power.

Random vibration test: frequency 30 ~ 100Hz, 2G, axial: three axial. Time: 1 hour in each direction, for a total of three hours, the tablet is in standby mode.

Screen impact resistance test: 11φ/5.5g copper ball fell on the center surface of 1m object at 1.8m height and 3ψ/9g stainless steel ball fell at 30cm height

Screen writing durability: more than 100,000 words (width R0.8mm, pressure 250g)

Screen touch durability: 1 million, 10 million, 160 million, 200 million times or more (width R8mm, hardness 60°, pressure 250g, 2 times per second)

Screen flat press test: the diameter of the rubber block is 8mm, the pressure speed is 1.2mm/min, the vertical direction is 5kg force flat press the window 3 times, each time for 5 seconds, the screen should display normally.

Screen front flat press test: The entire contact area, the direction of the vertical 25kg force front flat press each side of the tablet computer, for 10 seconds, flat press 3 times, there should be no abnormal.

Earphone plug and remove test: Insert the earphone vertically into the earphone hole, and then pull it out vertically. Repeat this for more than 5000 times

I/O plug and pull test: The tablet is in standby state, and the plug terminal connector is pulled out, a total of more than 5000 times

Pocket friction test: Simulate various materials pocket or backpack, the tablet is repeatedly rubbed in the pocket 2,000 times (friction test will also add some mixed dust particles, including dust particles, yan grass particles, fluff and paper particles for mixing test).

Screen hardness test: hardness greater than class 7 (ASTM D 3363, JIS 5400)

Screen impact test: hit the most vulnerable sides and center of the panel with a force of more than 5㎏

#Thermal Shock Test Chamber #Constant Temperature and Humidity Test Chamber #Hot and Cold Temperature Test Chamber #Thermal Cycling Chamber #Hot and Cold Shock Test Chamber #Thermal-humidity Test Chamber

The development prospects of high and low temperature wet heat test chambers are promising

2024-10-18

The development prospects of high and low temperature wet heat test chambers are promising

Nowadays, China's environmental testing equipment industry is rapidly developing, constantly innovating and surpassing. However, compared to the international level, China has only reached the technical level of the mid-1990s. The development of modern industrial testing equipment not only depends on the level of product technology, but also involves engineering application technology. But many products in our country have already reached the level of international mainstream products, with a wide variety, complete specifications, low prices, and are very competitive in the international market; For example, the high and low temperature wet heat test chamber has reached the international product level.

The high and low temperature damp heat test chamber in China has done very well both in terms of product reliability and product precision. Now the test chamber in China is becoming more and more intelligent and integrated into the Internet. As long as you have a computer, you can control it anywhere and anytime; And the price is relatively cheaper compared to foreign countries, with the same quality but different prices. However, it is still necessary to constantly innovate technological indicators, constantly surpass oneself, and become a leader in environmental testing equipment. From the current perspective, the development path of high and low temperature wet heat test chambers is bright.

On the other hand, China's environmental testing equipment industry is accelerating from laboratories to the forefront of production, and to people's homes and lives. Portable, handheld, and personalized instruments are developing in large numbers, and commodity testing, environmental testing, and health testing have become new demand hotspots; The current trend in the development of instruments and meters is on the rise. It is believed that soon, China's leading product in the environmental testing industry, the high and low temperature wet heat test chamber, will be far ahead in terms of technology, brand, and other aspects internationally.

Dear customer:

Hello, our company is a high-quality development team with strong technical strength, providing high-quality products, complete solutions, and excellent technical services to our customers. The main products include walk-in constant temperature and humidity testing chambers, UV accelerated aging testing machines, rapid temperature change testing chambers, walk-in environmental testing chambers, UV aging testers, constant temperature and humidity chambers, etc. Our company adheres to the principle of building a business with integrity, maintaining quality, and striving for progress. With a more determined pace, we continuously climb new heights and contribute to the national automation industry. We welcome new and old customers to confidently choose the products they like. We will serve you wholeheartedly!

#Temperature Cycling Test Chamber #Hot And Cold Temperature #Temperature and Humidity Chamber #Constant Temperature Test Chamber #Programmable Constant Temperature And Humidity Test Chambers #High temperature aging chamber

UV accelerated aging testing machine with humid condensation environment and water spray system

2024-10-18

UV accelerated aging testing machine with humid condensation environment and water spray system

In many outdoor environments, materials can be kept moist for up to 12 hours per day. Research has shown that the main factor causing outdoor humidity is dew, not rainwater. GUV simulates outdoor moisture erosion through its unique condensation function. In the condensation cycle during the experiment, the water in the reservoir at the bottom of the testing chamber is heated to generate hot steam, which fills the entire testing chamber. The hot steam maintains the relative humidity in the testing chamber at 100% and maintains a relatively high temperature. The sample is fixed on the side wall of the testing chamber, so that the testing surface of the sample is exposed to the ambient air inside the testing chamber. The outward side of the sample exposed to the natural environment has a cooling effect, resulting in a temperature difference between the inner and outer surfaces of the sample. The occurrence of this temperature difference causes the sample to always have liquid water generated by condensation on its testing surface throughout the entire condensation cycle.

Due to outdoor exposure to moisture for up to ten hours a day, a typical condensation cycle typically lasts for several hours. GUV provides two methods for simulating humidity. The most commonly used method is condensation, which is the best way to simulate outdoor moisture erosion. All GUV models are capable of running condensation cycles. Because some application conditions also require the use of water spray to achieve practical results, some GUV models can operate both condensation cycle and water spray cycle.

For certain applications, water spray can better simulate the environmental conditions of final use. Water spraying is very effective in simulating thermal shock or mechanical erosion caused by temperature fluctuations and rainwater erosion. Under certain practical application conditions, such as sunlight, when the accumulated heat rapidly dissipates due to sudden showers, the temperature of the material will undergo a sharp change, resulting in thermal shock, which is a test for many materials. GUV's water spray can simulate thermal shock and/or stress corrosion. The spray system has 12 nozzles, with 6 on each side of the testing room; The sprinkler system can run for a few minutes and then shut down. This short-term water spray can quickly cool the sample and create conditions for thermal shock.

Dear customer:

Hello, our company is a high-quality development team with strong technical strength, providing high-quality products, complete solutions, and excellent technical services to our customers. The main products include walk-in constant temperature and humidity testing chambers, UV accelerated aging testing machines, rapid temperature change testing chambers, walk-in environmental testing chambers, UV aging testers, constant temperature and humidity chambers, etc. Our company adheres to the principle of building a business with integrity, maintaining quality, and striving for progress. With a more determined pace, we continuously climb new heights and contribute to the national automation industry. We welcome new and old customers to confidently choose the products they like. We will serve you wholeheartedly!

#Temperature Cycling Test Chamber #Temperature Change Test Chamber #Reliable Temperature And Humidity Test Machine #UV accelerated aging testing machines #walk-in constant temperature and humidity testing chambers #rapid temperature change testing chambers

Guide to Using the Electric Manto Automatic Production Line With Cutter

2024-10-18

#Steamed Stuffed Bun Machine

If you’re new to using the Electric Manto Automatic Production Line with Cutter, you’re in the right place! In this step-by-step guide, we’ll walk you through the process of utilizing this cutting-edge machine. Whether you’re a hobbyist or a small business owner, this guide will help you maximize your productivity and get the most out of your investment.

Step 1: Set Up the Machine

Before you start using the Electric Manto Automatic Production Line with Cutter, it’s crucial to properly set it up. Follow these steps:

Clear the workspace: Ensure that the area surrounding the machine is clean and tidy, providing ample space for operation.
Connect the power supply: Plug in the power cord to a reliable power outlet.
Install and secure the cutter: Attach the cutter firmly to the designated slot on the machine.
Install the required software: If applicable, install any accompanying software on your computer or connected device.

Step 2: Prepare the Materials

Once the machine is set up, it’s time to prepare the materials for production. Here’s how to do it:

Choose the appropriate material: Identify the material you want to use for your project, whether it’s fabric, paper, or plastic.
Cut the material to size: Measure and cut the material to the desired dimensions, ensuring it fits within the machine’s specifications.
Remove any debris: Make sure the material is free from dust, lint, or any other debris that could interfere with the machine’s performance.

Step 3: Load the Material

With the machine and materials ready, it’s time to load the material into the Electric Manto Automatic Production Line with Cutter. Follow these instructions:

Open the machine’s loading bay: Some machines feature a lid or a sliding tray that gives access to the loading area.
Position the material: Place the prepared material carefully within the designated loading area. Ensure it aligns properly and is secured in place.

Step 4: Configure the Settings

Now it’s time to configure the settings of the machine. This step may vary depending on the specific model and software used. Follow the manufacturer’s instructions to adjust the relevant settings, such as:

Cutting speed: Select the appropriate cutting speed based on your material and desired precision.
Cutting depth: Set the cutting depth according to the thickness of your material.
Cutting pattern: If your machine offers different cutting patterns, choose the most suitable one for your project.
Any additional settings: Depending on the machine’s capabilities, you may need to adjust other settings such as temperature or pressure.

Step 5: Start the Production

With all the preparations complete, it’s time to put the machine to work. Follow these steps to start the production:

Double-check the material alignment: Ensure the material is still properly aligned within the machine.
Press the start button: Activate the cutting process by pressing the designated start button on the machine or the connected device.
Monitor the progress: Keep an eye on the machine as it begins cutting the material. Make sure everything is running smoothly and intervene if necessary.

Step 6: Collect the Finished Product

Once the machine has completed its cutting process, it’s time to collect your finished product. Follow these final steps:

Remove the material from the machine: Open the machine’s loading bay or designated area to retrieve your cut material.
Inspect the quality: Examine the finished product for any imperfections or errors. Take note of any adjustments needed for future projects.
Clean up: Clean the machine and the workspace, removing any scraps or debris.

Congratulations! You have successfully used the Electric Manto Automatic Production Line with Cutter. By following these steps, you can streamline your production process and achieve high-quality results each time. With practice and experimentation, you’ll become a pro at utilizing this advanced machine to bring your creative ideas to life.

#Frozen Momo Bun Maker Machine #Chinese steamed buns machine #Manto Automatic Production Line #Automatic Production Line With Cutter #380V Automatic Production Line #commercial steamed buns machine #Manto automatic line with cutting feature #Electric Manto making machine with cutter

Fluorine Lined Magnetic Self-Priming Pump A Solution for Efficient Pumping

2024-10-17

#Self-Priming Pump #Fluorine Lined Pump

The Fluorine Lined Magnetic Self-Priming Pump is a revolutionary innovation in the world of pumping technology. Designed with precision and efficiency in mind, this pump offers a host of benefits that make it an ideal choice for various industries.

Magnetic Self-Priming Pump: A Step Ahead in Pumping Efficiency

The Magnetic Self-Priming Pump is a game-changer in the pumping industry. Utilizing cutting-edge magnetic drive technology, this pump eliminates the need for traditional seals and reduces the risk of leakage. With its self-priming feature, it can efficiently handle difficult media and effectively overcome suction lift challenges. Designed for reliability and durability, this pump is a versatile solution that meets the demands of modern pumping applications.

Fluorine Lined Self-Priming Pump: A Corrosion-Resistant Powerhouse

For industries dealing with corrosive fluids, the Fluorine Lined Self-Priming Pump is the perfect choice. Constructed with a fluorine lining, it provides excellent resistance to a wide range of aggressive chemicals, making it ideal for applications where other materials may fail. The self-priming capability ensures smooth operation, while the fluorine lining ensures longevity and reliability, even in harsh environments.

Choosing the Right Self-Priming Pump Supplier is Crucial

When it comes to investing in self-priming pumps, selecting the right supplier is paramount. The market is flooded with options, but not all suppliers are created equal. Look for a supplier that offers certified products, adheres to strict quality standards, and has a proven track record of customer satisfaction. By partnering with a reliable self-priming pump supplier, you can ensure the quality and performance of your pumping system.

Leading Magnetic Self-Priming Pump Manufacturers

Several manufacturers have gained recognition for their exceptional magnetic self-priming pumps. Their commitment to innovation and quality has set them apart in the industry. From compact design to energy efficiency, these manufacturers prioritize customer needs and deliver pumps that perform admirably in various applications. Their magnetic self-priming pumps have become the go-to choice for industries seeking reliable and efficient pumping solutions.

Unleashing the Potential of Self-Priming Mag Drive Pumps

Self-priming mag drive pumps offer a unique combination of convenience and performance. With their magnetic drive technology and self-priming functionality, these pumps can handle challenging media with ease. The absence of shaft seals minimizes the risk of leaks and simplifies maintenance, saving both time and resources. Whether it’s for chemical processing, wastewater treatment, or any other application, self-priming mag drive pumps provide an effective and efficient pumping solution.

Conclusion

The Fluorine Lined Magnetic Self-Priming Pump, Magnetic Self-Priming Pump, and Fluorine Lined Self-Priming Pump are all exceptional options for industries seeking efficient and reliable pumping solutions. With their advanced features, corrosion resistance, and self-priming capability, these pumps are changing the game in the pumping industry. By choosing the right self-priming pump supplier and exploring the offerings of leading manufacturers, industries can unlock the true potential of self-priming mag drive pumps and achieve optimal performance in their operations.

#Fluorine Lined Magnetic Self-Priming Pump #Magnetic Self-Priming Pump #Fluorine Lined Self-Priming Pump #Self Priming Pump Supplier #Magnetic Self-Priming Pump manufacturers #Self-priming mag drive pumps

Introducing the Kraft Liner Paper Machine Revolutionizing the Paper Industry

2024-10-15

#Kraft and Test Liner Paper Machine #Paper Machine

The paper industry is constantly evolving, seeking innovative solutions to meet the growing demand for high-quality paper products. One such advancement is the Kraft Liner Paper Machine, a game-changer in the field of paper manufacturing.

What is a Kraft Liner Paper Machine and how does it work?

The Kraft Liner Paper Machine is a state-of-the-art, high-speed automatic control craft paper machine that produces kraft liner paper. It utilizes advanced technology and precision engineering to create a consistent, high-quality product. This machine is designed to handle large volumes of raw materials and convert them into strong, durable kraft paper.

Features of the High-Speed Automatic Control Craft Paper Machine

The high-speed automatic control craft paper machine boasts several impressive features that set it apart from traditional paper machines. With its advanced automation capabilities, this machine significantly reduces human intervention, resulting in improved efficiency and productivity. It is equipped with cutting-edge sensors and control systems, ensuring precise paper formation and minimizing waste.

The 200 tons Kraft Paper Making Machine: A Production Powerhouse

The 200 tons Kraft Paper Making Machine is an integral component of the Kraft Liner Paper Mill. This massive machine allows for large-scale production of kraft paper, catering to the ever-increasing demand from various industries. Its robust construction and intelligent control system enable it to operate seamlessly, producing high-quality kraft paper consistently and efficiently.

Establishing the 4000 Kraft Paper Production Line

To meet the global demand for kraft paper, the establishment of a 4000 Kraft Paper Production Line is paramount. This production line incorporates multiple Kraft Liner Paper Machines to ensure continuous production and meet the required output targets. By utilizing a combination of cutting-edge machinery, intelligent automation, and efficient processes, this production line can deliver high volumes of superior quality kraft paper.

Craft Paper Making Machine From OCC: A Sustainable Solution

In the quest for sustainable paper production, the industry has turned to utilizing waste paper as a raw material. The Craft Paper Making Machine, which utilizes Old Corrugated Containers (OCC) as the input material, exemplifies this sustainable approach. By recycling and reusing waste paper, this machine contributes to the conservation of natural resources and reduces environmental impact.

In conclusion, the introduction of the Kraft Liner Paper Machine, High-Speed Automatic Control Craft Paper Machine, 200 tons Kraft Paper Making Machine, Kraft Liner Paper Mill, 4000 Kraft Paper Production Line, and Craft Paper Making Machine from OCC represents a significant advancement in the paper industry. These modern technologies provide efficient and sustainable solutions to cope with the growing global demand for kraft paper. By adopting these innovative machines, the industry is poised to revolutionize paper production and contribute to a greener future.

#Kraft Liner Paper Machine #High Speed Automatic Control Craft Paper Machine #200 tons Kraft Paper Making Machine #Kraft Liner Paper Mill #4000 Kraft Paper Production line #Craft Paper Making Machine From OCC

HDPE and PP Separation with NIR Sorting technology

2024-10-12

High-density polyethylene (HDPE) is a widely used and recyclable plastic. Nonetheless, the presence of polypropylene (PP) contamination poses a significant issue in recycled HDPE streams.

NIR sorting for HDPE and PP separation

Plastic Mixture

Can PP and HDPE be recycled together?
PP and HDPE are distinct types of plastic with different chemical compositions and properties. When they are mixed together in the recycling stream, it can result in various issues:

Reduced quality: Mixing PP with HDPE can lead to lower-quality recycled HDPE material. The properties of the resulting plastic may not meet the required standards for certain applications.

Compatibility issues: PP and HDPE have different melting points and processing requirements. Combining them can make it difficult to maintain the consistency and quality of the recycled material during the melting and molding stages.

Material weakness: The combination of PP and HDPE can result in a recycled material that has reduced strength, durability, and performance. This can be problematic, especially in applications where HDPE's mechanical properties are critical.

Identification and Separation of polymers in the industry
One of the biggest challenges facing the plastics recycling industry today is separating all of the various polymers entering the recycling stream. Separating PP from HDPE during the recycling process can be challenging due to their similar appearance. This can result in contamination if they are not adequately separated at recycling facilities.

To mitigate contamination issues, recycling facilities often employ advanced sorting and separation technologies to ensure that PP and HDPE are properly separated. This involves using optical sorters, air classifiers, and other equipment to identify and separate different types of plastics.

Near Infrared (NIR) Sorting Technology

Among them, the NIR-based sorting machines are widely used in the recycling industry to identify and separate various types of plastics based on their unique spectral signatures in the near-infrared range. These machines can accurately differentiate between different polymer types, such as PET, HDPE, PP, PVC, and more, facilitating the efficient recycling of plastics and reducing contamination in the recycling stream.

PP & HDPE Flakes Separation

AMD's plastic color sorting machines are known for the high accuracy and reliability. We contribute to efficient recycling operations by reducing contamination in the recycling stream and ensuring the production of clean, high-quality recycled materials.

Tags :

#Plastic Color Sorter #Plastic Sorting Machine #Color Sorter Machine

AMD Macadamia Nuts Sorting Equipment & Solution

2024-10-12

The macadamia industry is growing amid a rapidly changing world. What worked yesterday might not work tomrrow. Delivering a high quality product to broad base of comsumers is imperative to maintaning prices. And continuous growth in consumption requires continuous innovation.

Macadamia Nuts Sorting Equipment

With leading multi-spectral detection technology, AMD® sorters provide superior detection capabilities to help you eliminate defects in macadamia nuts and ensure consistent food safety.

AMD has introduced a comprehensive inspection and sorting solution for the macadamia nut industry. This solution is applicable to both external and internal inspection of inshell macadamia nuts, as well as color and shape sorting of macadamia kernels, among other functions, assisting enterprises in enhancing both the yield and quality of their products.

INSHELL MACADAMIA NUTS SORTING

External Sorting

AMD® LGY Series Belt-type Optical Sorting Machine can replace manual work and accurately identify the defects of shelled macadamia nuts including obvious breakage, abnormal colour spots, dirty nuts, mold filaments and other substandard products.

Based on visible light technology, the AMD® LGY offers processors the flexibility of sorting different varieties and grades of macadamia nuts in-shell, whole, halves, and pieces.

AMD® LGY Inshell Macadamia Nuts Color Sorting Machine

Internal Sorting
The AMD® KXA6 Series X-ray inspection system can effectively remove the typical internal defects of macadamia nut-in-shell, such as empty, shriveled, discolored, cracked shell, rotten, insect-damaged nuts caused by stink bugs.
Tailored algorithm for macadamia nuts, featuring large yield, high precision, low carry-out, low radiation value.

AMD® KXA6 Series X-ray Inspection System for Inshell Macadamia Nuts

Macadamia Nut Kernel Sorting

Based on AI deep learning, visible light and infrared sorting technology, AMD® P-LGID series sorting equipment can achieve kernel-shell separation while accurately identifying and separating different colours, and rejecting defective products such as insect damage, shrivelled, mouldy and dried.

AMD® P-LGID4 AI Sorting Machine for Macadamia Nut Kernel

Safeguarding food safety in nut processing. Boost efficiency, reduce waste, and minimize labor reliance. AMD® COLOR SORTER take macadamia nuts grading to new levels.

Get in touch with one of our sales manager today and get tailored macadamia nuts sorting machines & solution.

Any inquires, please send to amdsortex@gmail.com

Tags :

#Nuts Sorting Equipment #Macadamia Color Sorter #Nuts Sorting machine

Say Goodbye to Flooding Showers with the 600 GPH Multi Port Shower Sump Pump Drain Kit System

2024-10-12

#Shower sump pumps #Shower pump

Are you tired of dealing with flooded showers and the hassle of constantly mopping up water? Look no further! Introducing the revolutionary 600 GPH Multi Port Shower Sump Pump Drain Kit System. Designed specifically for shower pump enthusiasts, this pump system offers a range of unique features and benefits that will transform your showering experience.

Unmatched Performance and Efficiency

One of the standout features of the 600 GPH Multi Port Shower Sump Pump Drain Kit System is its exceptional performance. With a flow rate of 600 gallons per hour, this pump is designed to handle even the most demanding shower conditions. Whether you enjoy indulging in long, luxurious showers or have a large family with multiple showers running simultaneously, this pump will ensure efficient drainage and prevent any potential flooding.

Versatile Multi Port Design

Unlike conventional sump pump systems, the 600 GPH Multi Port Shower Sump Pump Drain Kit System boasts a unique multi port design. This enables you to effortlessly connect multiple showers to a single pump unit, eliminating the need for separate pumps and drastically reducing installation and maintenance costs. With its easy-to-use port connections, you can conveniently connect your showers to the pump system, ensuring efficient drainage for all your shower areas.

Quiet and Reliable Operation

No one wants a noisy pump disrupting their relaxation time in the shower. That’s why the 600 GPH Multi Port Shower Sump Pump Drain Kit System has been engineered to provide near-silent operation. Say goodbye to the constant humming and buzzing associated with traditional pumps. With this system, you can enjoy a peaceful and serene shower experience without any mechanical disturbances.

Durable and Easy to Maintain

Constructed from high-quality materials, the 600 GPH Multi Port Shower Sump Pump Drain Kit System is built to last. Its robust design ensures durability, making it resistant to corrosion and wear over time. In addition, maintenance is a breeze with its self-cleaning feature, which prevents clogs and blockages. This means you can spend less time worrying about pump maintenance and more time enjoying your showers.

Energy-efficient and Eco-friendly

With a growing emphasis on sustainability, the 600 GPH Multi Port Shower Sump Pump Drain Kit System is designed with energy efficiency in mind. This pump not only reduces water wastage but also consumes minimal electricity, making it an eco-friendly choice. By investing in this pump, you can contribute to environmental conservation without compromising on performance or convenience.

Conclusion

If you’re tired of dealing with flooded showers and want a reliable, efficient, and versatile solution, the 600 GPH Multi Port Shower Sump Pump Drain Kit System is your answer. With its unmatched performance, multi port design, quiet operation, durability, and eco-friendliness, this pump system is a game-changer for shower pump enthusiasts. Say goodbye to the hassle of water flooding and hello to a luxurious and worry-free showering experience. Upgrade your shower pump system today and enjoy the benefits it has to offer!

#Shower Pump System #Shower Drain Box #shower Drain Pump