Smart Watch Reliability Test Conditions
In today's society, elementary school students and even kindergarten children have a smart watch. So, what is a smartwatch? In the late period of sports watch promotion due to the rapid takeoff of smart phones, the smart table has no intention to provide the same PIM effect as PDA and smart phones, and appeals to the smart phone agent assistant accessories, similar to Bluetooth headphones are voice AIDS of smart phones, smart tables become information and data AIDS, providing more convenient and fast information display and operation. There are also other names such as Smart Accessory and Android Remote. Positioned as a mobile phone assistant, the idea is that "the reason why the pocket watch is extinct is because it is simply to look at the time, but also take out the pocket, about 2-3 seconds, but the watch is less than 1 second, which is more convenient than the pocket watch." And after observation, now everyone takes out a smartphone and slides open, just to confirm the message, so that about dozens of times, these confirmation even typing reply do not need, if the dozens of confirmation changed on the watch, you do not always have to pull the machine slide unlock, because this is as time-consuming as a pocket watch. Therefore, after becoming the assistant of the mobile phone, the remote control, if you do not take the mobile phone to go out, the watch is useless in addition to showing the time, and the Bluetooth headset without a mobile phone, almost scrap metal.
Combined with smart bracelet to sell better!!
Smart watch from "smaller than the PDA independent computer" to "smart phone remote control AIDS", seems to have been a more successful positioning, but this CES 2014 can be seen, combined with smart bracelet positioning is better. The smart wristband uses acceleration sensors (and gyroscopes, magnetoresistive sensors, etc.) to sense the user's running speed, step count, etc., and can even detect deep sleep and provide suggestions for exercise and sleep. When the wristband is added to the display, it can display the time and information on the mobile phone. Appeal to mobile phone information, if there is no urgent information needs, in fact, only similar to the Bluetooth headset is regarded as an option (Courier, driver need), if everyone can accept the information access speed of sliding, then the market will be limited. However, in addition to the appeal for exercise and sleep record supervision, and emphasize information tips, rather than emphasizing the remote control of the watch on the mobile phone, it is equivalent to a little sacrifice or almost no sacrifice to the end user, but it brings immediate and new application value (sports, sleep assistance), rather than completely repeating the efficacy value of the mobile phone, which further increases the market success of the smart watch. After constantly adjusting the efficacy, application and positioning, and integrating with the smart ring, we believe that we can have a higher market than in the past.
Smart watch for people and functions:
1. Smart watches for adults
Functions: Bluetooth synchronous mobile phone calls, send and receive text messages, monitor sleep, monitor heart rate, sedentary reminder, running, remote photography, music playback, video, compass and other functions, designed for fashion trend people!
2, Smart watch for the elderly
Functions: ultra-accurate GPS positioning, family calls, emergency calls, heart rate monitoring, sedentary reminders, medicine reminders and other customized functions for the elderly, providing an umbrella for the elderly's travel, bring this watch, refuse to lose the elderly!
3, Children positioning smart watch
Functions: multiple positioning, two-way call, SOS SOS, remote monitoring, intelligent anti-loss, historical track, electronic fence, pedometer, love reward and other functions, to ensure the safety of children, give children a healthy and safe growth environment!
Smart watch specification:
IEC 60086-3: Watch batteries
ISO 105-A02: Colour fastness test -A02 - Grey scale assessment for discoloration
ISO 105-A03-1993: Tests for colour fastness -A03- Grey scale assessment of dyeing
ISO 764: Horological anti-magnetic watches
ISO 1413: Horological shockproof watches
ISO 2281: Horological waterproof watches
ISO 11641-1993: Leather - tests for colour fastness - Colour fastness to perspiration
ISO 14368-3: Impact resistance test of table glass
MIL 810G: Environmental engineering considerations and laboratory testing
QB/T 1897-1993: Waterproof watch inspection
QB/T 1898-1993: Inspection of shockproof watches
QB/T 1908-1993: Key reliability test
QB/T 1919-2012: Type inspection of digital quartz watches with hands and liquid crystal
QB/T 2047-2007: Inspection of metal watchbands
GB/T 2537-2001: leather color fastness test reciprocating grinding color fastness
QB/T 2540-2002: Leather strap inspection
GB/T 6048-1985: digital quartz electronic watch
GB/T 18761-2007: electronic digital display indicator
GB/T 18828-2002: Standard for diving watches
GB/T 22778-2008: LCD digital quartz stopwatch type inspection
GB/T 22780-2008: Type inspection of LCD quartz watches
GB/T 26716-2011 idt ISO 764-2002: Inspection of anti-magnetic watches
HJ216-2005: Eco-Drive watch
Smart watch pilot project:
Reliability, time period measurement accuracy, instantaneous daily difference, operating temperature, voltage range, average temperature coefficient, voltage coefficient, moisture resistance, shock resistance, waterproof performance, battery replacement cycle, key fatigue resistance, light and weather resistance, antistatic performance Ambient temperature range: -25℃ ~ 55℃ Operating temperature: -5 ~ 50℃/80%R.H.(Requirements: each function and liquid crystal display should be complete and normal) High and low working temperature test: 50±1℃/24h→RT/1h→-5±1℃ Temperature change test conditions: (IEC60068-2) High temperature: 30, 40, 55℃ Low temperature: 5, -5, -10, -25℃ Nb residence time (including rising and cooling time) : 10min, 30min, 1hr Nb temperature variability: 3±0.6℃/min, 5±1℃/min.
Wet heat test:
1.40±1℃/85 ~ 95%R.H./24h
2.8±1℃/85 ~ 95%R.H./4h
Warehouse storage humidity test:
40℃/20%, 30%, 40%, 50%, 60%, 70%, 80%, 90%
49℃/10%, 20%, 30%, 40%, 50%, 60%, 70%, 80%, 90%
Each step37 hours
Air transport temperature change simulation test:
Specification: IEC60721.2 Electrical and electronic products application environmental conditions - transport national standard
Category: 2K5 (Applicable to the climatic range of unventilated and unpressurized internal transport worldwide)
Temperature range: -65℃←→85℃
RAMP: 5℃/min
Air transport temperature change simulation test:
Specification: IEC60721.6 Electrical and electronic products application environmental conditions - Marine
Category: 6K5 (subject to cold weather, installed in weather-protected but unheated parts)
Temperature range: -25℃←→40℃
RAMP: 3℃/min
Water temperature change resistance test:
5min in 40℃ water → 5min in 20℃ water, 5min in 40℃ water, water depth of 10cm
Water pressure resistance test:
Soak the watch in a container of water, apply an overpressure of 2*10^5Pa[or 20m water depth] within 1 minute, maintain 10 minutes, and then in 1 minute the pressure will be to the standard pressure of the surrounding environment
Salt water resistance test:
Put the watch under test into 30g/L sodium chloride solution at 18 ° C ~ 25 ° C for 24h. Check the case and accessories after the test should not have significant changes; Check the moving parts, especially the rotating front ring should be able to maintain normal function
Underwater reliability test:
The watch under test is immersed in 30cm±2cm of water and placed at a temperature of 18 ° C ~ 25 ° C for 50h, and all mechanical devices should still work normally. During the test, mechanical devices that need to be operated in water, such as time presetting devices and light switches, should be able to work normally; Do condensation test, the inner surface of the table glass shall not appear condensation fog, and the mechanical function should not be damaged
Thermal shock resistance test:
Immerse the watch in water of different temperatures with a depth of 30cm±2cm successively: place it in water of 40 ° C ±2 ° C for 10 minutes; Put in 5℃±2℃ water for 10 minutes; Put in water at 40 ° C ± 2 ° C for 10 minutes (the watch shall not be removed from the water and re-immersed in another water temperature for more than 1 minute). Do condensation test, the inner surface of the table glass shall not appear condensation fog, and should operate normally.
Chemical resistance test:
Citation Specifications: ASTM F 1598-95, ASTM D 1308-87, ASTM D 1308-02
Ingredients: Household chemicals (dirt, dust, oil, fumes and peanut butter, cosmetics, hand cream... Etc.)
Time: 24 hours
Corrosion resistance to artificial sweat test:
QB/T 1901.2-2006 "Gold alloy covers of shell and its accessories - Part 2 Test for purity, thickness, corrosion resistance and adhesion"
Test principle: The artificial sweat is used to contact the object under high temperature (40±2) ℃, and after a long time (not less than 24 hours), the condition of its surface is observed to determine its resistance to sweat corrosion.
Vibration test:
Acceleration (19.6m/s^2), frequency 30Hz ~ 120Hz, scanning cycle 1min
Requirements: The functions and the LCD display should be complete and normal, and the parts should not be loose and fall off
Drop test:
1m drop lithographic hardwood, once watch side, once surface glass
Requirements: Normal function after each impact, no appearance damage [broken glass, case foot bent, case component bent, case broken, button damaged]
Impact test:
Impact cone pad material: polytetrafluoroethylene, impact speed 4.43m/s, impact height 1m
Arm swing test:
2 to 10Hz
